157
Unless stated otherwise, all dimensions are given in mm.
MANTO®
14.2.2 MANTO Strut Connector
The MANTO Strut Connector (code:565114) can be connected to vertically or horizon-
tally arranged MANTO panels.
When using Alignment Struts, the Adapter for Alignment Struts (code:601733) is also
needed. When using steel props, the Strut Adapter (code:565331), the Strut Base
(code:566369) and 4no. Bolts M12×30 with Nut (code:5210) are also needed.
The following table shows the permitted strut loads.
α
N
perm.
Safe working load [kN] (strut load N
perm
)
MANTO Strut Connector with vertical panels (horizontal ribs)
Strut angle α to
the horizontal
Distance to panel edge or centre profile
200 mm
300 mm
400 mm
500 mm
600 mm
50°
16.92
12.76
10.88
10.02
9.78
55°
16.65
12.61
10.75
9.89
9.65
60°
16.40
12.35
10.52
9.65
9.46
MANTO Strut Connector with horizontal panels (vertical ribs)
50°
4.60
55°
4.40
60°
4.30
When using horizontally arranged extension panels or horizontal panels, pay attention
to the assembly direction of the panels. Panels must be assembled in such a way that
the ribs are open from the right side. Otherwise the Strut Connector will be mounted in
the wrong direction and the props cannot be attached.
Alignment
Strut
MANTO Strut Connector
(code:565114)
Adapter for Alignment Struts
(code:601733)
N
Bolt D16x87 (code:601908) +
Spring Cotter Pin 4 (code:173776)
(Included in delivery)
Bolt D16x87 (code:601908) + Spring
Cotter Pin 4
(code:173776). Order separately!
Summary of Contents for Huennebeck MANTO G3
Page 1: ...MANTO Large frame panel formwork User guide...
Page 9: ...9 Unless stated otherwise all dimensions are given in mm MANTO...
Page 61: ...61 Unless stated otherwise all dimensions are given in mm MANTO MANTO G3 M MANTO G3 M...
Page 219: ...219 Unless stated otherwise all dimensions are given in mm MANTO...
