Sacmi CCM001, User Manual

Page: 145 / 164

002AZ001A
8 - 39
MAINTENANCE
8
E0004P
ATTENTION!
Be careful not to ruin the gaskets when installing the flange on the actuator or the actuator itself.
8.1.2.6.7 Greasing the roller and stripper rod pin
- Grease the rod wheel with grease fitting (15) found on the support pin for the wheel. Use the grease gun provided.
8.1.2.6.8 Lubricating the stripper rod guide bushes
- Loosen the nut (10) and take out the spacer.
- Loosen the pin (12).
- Take out the fork (11) and stripper (13) at the same time.
- Raise the rod and grease the cylindrical surface that has just been exposed. Push the rod inside the unit so that the
grease lubricates the bushes. Repeat this operation several times to assure the lubricant penetrates.
- Carry out the operations in reverse order to put the parts back in place.
8.1.2.6.9 Greasing the central tool wheel (optional)
- Grease the central tool wheel with grease fitting (14) found on the support pin for the wheel. Use the grease gun
provided.