Sacmi CCM001, User Manual

Page: 62 / 164

002AZ001A
4 - 4
4
INSTALLATION
T1585
Figure 4.2 - PUTTING THE PARTS IN PLACE
1 Press
2 Extruder
3 Hydraulic power unit
4 Extruder connecting tube
5 Electric cabinet
15 Extruder feeder (optional)
16 Feed hopper (optional)
17 Temperature regulator
18 Chiller (optional)
6 Extruder tracks
8 Press fixing block
9 Tube trunk
10 Electric wires trunk
11 Control panel
18 17 3 9 1
10
11
6
15
5
2
4
8
16
4.2 POSITIONING
The various parts of the machine are to be placed in the order given below, referring to figure 4.2.
- Position the press (1).
- Put the extruder tracks (6) in place.
- Place the extruder (2) on the tracks.
- Install the extruder connecting tube (4) making sure the coupling flange is clean. Tighten the nuts and bolts with a
torque wrench.
- Level the press (1) with the adjustable height legs.
- Secure the press (1) using the fixing blocks (8).
- Put the hydraulic power unit (3) in place.
- Position the temperature regulator (17).
- Put the chiller (18) in place.
- Put the electric cabinet (5) in its correct position.
- Install the plastic compound feed hopper (16) on the extruder.
- Mount the plastic compound feeder (15) on the hopper.
- Put the trunks (9 and 10) that protect the tubes and electric wires in place
- Put the control panel (11) in place.