Sacmi CCM001, User Manual

Page: 102 / 164

002AZ001A
7 - 16
7
ADJUSTMENTS
7.8 ADJUSTING THE EXIT CHANNEL
Adjusting the angular position
The exit channel can be turned to center the product with the downstream machine’s entry.
Conditions:
- Mode selector turned to set-up.
Adjustments:
- Loosen the screw (12).
- Turn the cam (11) until the cap (16) is correctly positioned.
- Loosen the screws (14) and adjust the position of the back-plate (17), if necessary.
- Fully tighten the screws (14).
- Fully tighten the screw (12).
Adjusting timing in relation to the stripper wheel
Conditions:
- Mode selector turned to set-up.
Adjustments:
- Loosen the screw (18) by placing the wrench through the holes (9).
- Turn the belt (1) to change the position of its tooth (19) in relation to the stripper wheel’s compartment (20).
- Fully tighten the screws (18).
Tensioning the belt with compartments
Conditions:
- Mode selector turned to set-up.
Adjustments:
- Loosen the nut (21).
- Work on the adjuster (22) to loosen or tighten the belt (1).
- Fully tighten the nut (21).