Sacmi CCM001, User Manual

Page: 38 / 164

002AZ001A
2 - 24
2
MACHINE FEATURES
2.3.2 OPERATIONAL CHARACTERISTICS
TYPE OF PRODUCT
The machine can produce thermoplastic products whose dimensions have been previously agreed upon with SACMI’s
Engineering Dept.
TYPE OF MATERIAL
The machine can handle the following types of thermoplastic material:
- POLYPROPYLENE (PP)
- POLYETHYLENE (HDPE;LDPE)
The machine is set up in a different way depending upon the material used. In addition, special parts may be required.
A “Data Sheet” is provided with each machine on which the processing parameters for the selected material are given.
In addition, this data can be stored and called up whenever the material handled is changed.
E0004P
ATTENTION!
If material that is not included on the data sheet (facsimile given below) is used, contact SACMI’s laboratory before
starting processing.
PRODUCTION CAPACITY
The product output is strictly related to the type of object formed and material used.
The maximum production output is given in the SPECIFICATIONS
Figure 2.3.2 - PRODUCT CHARACTERISTICS
The dimensions given in the figure are for reference purposes
only and are not binding in any way.
MAX 600 PCS/m’
MAX 3.3 Kg/1'
T1498
Min
Max
43
25
20
5