Sacmi CCM001, User Manual

Page: 163 / 164

002AZ001A
9 - 1
DECOMMISSIONING
9
9 DECOMMISSIONING
MAKING THE MACHINE INOPERATIVE WHEN NO LONGER USED
The operations given below need to be carried out when the machine is no longer used:
- Turn off the machine’s power supply by using the factory’s main switch.
- Unplug the power cable from the electrical cabinet’s terminal block.
- Disconnect the cables that join the cabinet to the machine, detaching the connectors.
- Disconnect the line between the factory’s compressed air mains and the control unit.
- Disconnect the lines that join the cooling system to the water mains and factory drain line.
E0035P
WARNING!
Discharge the gas under pressure from the accumulators by using the tester/inflator provided. Follow the
instructions given in Chapter 8 in the CHECKING THE ACCUMULATOR PRE-CHARGE paragraph.
- Thoroughly clean the machine paying particular attention to the moving parts. Lubricate as a protective measure,
if necessary.
- Close the doors of the electrical cabinet and machine to prevent the parts from being tampered with, dust from
building up, etc.
- Activate all the safety devices provided.
DISMANTLING THE MACHINE
Remove the various parts of the machine by carefully observing all current safety regulations as well as following
the directions given in chapter 4 - INSTALLATION in this manual. Special attention must be given to the
procedures for lifting and handling the machine as well as the warnings and precautions given in paragraph 3.3 -
SAFETY RULES FOR HANDLING.