RS PRO RSDM-9060, User Manual

Page: 95 / 412

95
Press F1 ~ F4 key to select desired hold percent.
For example, once the measured value is beyond
10%, which corresponds to the selected 10% option
here, the latest hold value will be updated on the
main reading.
F4 (BeepVol) key
to define beep
volume
Press the F4 (BeepVol) key to show
the menu of Volume level of Beep as
the following.
Press the F2 - F4 key to select volume level. Once
the latest hold value is updated, the beep sounds
based on the defined volume. Press the F1 key to
set Beep volume off.
F2 (MathDisp) key
to show STAT &
Math
Press the F2 (MathDisp) key to show
the option menu as the figure below
shown.
Proceed to the F2 (STAT) or F3
(Math) display in accord with the
following chapters.
Show STAT result Background
The STAT page in MathDisp allows
you to make statistical calculations for
several measurements including
Minimum, Maximum, Average Peak-
Peak, Standard Deviation and Count.