RS PRO RSDM-9060, User Manual

Page: 68 / 412

68
rspro.com
Connect the test
lead and measure
Connect the sensor lead
between the Input HI
terminal and the LO
terminal. The display
updates the reading.
General Temperature Setting
F2 (Speed) key to
select the rate
Press the F1 ~ F3 key to select the
desired rate
F3 (Auto Zero) key
to enable Auto
Zero Background
Autozero provides the
most accurate
measurements, but
requires additional time to
perform the zero
measurement. With
autozero enabled (On), the
RSDM-9060/9061
internally measures the
offset following each
measurement. It then
subtracts that
measurement from the
preceding reading. This
prevents offset voltages
present on the RSDM-
9060/9061’s input circuitry
from affecting
measurement accuracy.
With autozero disabled
(Off), the RSDM-
9060/9061 measures the
offset once and subtracts
the offset from all