RS PRO RSDM-9060, User Manual

Page: 311 / 412

311
CONFigure:CURRent:AC
Sets measurement to AC Current on the 1
st
display and
specifies range.
Parameter: [None] | [Range(<NRf> | AUTO | MIN | MAX | DEF)]
Example: CONF:CURR:AC 10e-2
Sets the measurement mode to AC Current with a 100mA
range.
CONFigure:RESistance
Sets measurement to 2-wire Resistance on the 1
st
display and
specifies range/resolution.
Parameter: [None] | [Range(<NRf> | AUTO | MIN | MAX |
DEF)[,Resolution(<NRf> | MIN | MAX | DEF)]]
Example: CONF:RES 10e3,MIN
Sets the measurement mode to 2-wire Resistance with a 10k
Ω
range at the lowest resolution.
●
Autoranging (AUTO or DEFault), will generate an error if you
specify a <resolution> because the instrument cannot
accurately resolve the integration time (especially if the input
continuously changes). If your application requires
autoranging, specify DEFault for the <resolution> or omit the
<resolution> altogether.
CONFigure:FRESistance
Sets measurement to 4-wire Resistance on the 1
st
display and
specifies the range/resolution.
Parameter: [None] | [Range(<NRf> | AUTO | MIN | MAX |
DEF)[,Resolution(<NRf> | MIN | MAX | DEF)]]
Example: CONF:FRES 1e3,MAX
Sets the measurement mode to 4-wire Resistance with a range
of 1k
Ω
at the maximum resolution.
●
Autoranging (AUTO or DEFault), will generate an error if you
specify a <resolution> because the instrument cannot
accurately resolve the integration time (especially if the input
continuously changes). If your application requires
autoranging, specify DEFault for the <resolution> or omit the
<resolution> altogether.