RS PRO RSDM-9060, User Manual

Page: 60 / 412

60
rspro.com
Frequency/Period In-Depth Setting
Background
The input voltage/current range for
frequency/period measurements can be set to
Auto range or to manual. By default, the
voltage/current range is set to Auto for both the
period and frequency.
Auto range
Press the Auto/Enter key. Auto will
be displayed on the upper right corner.
F2 (Gate Time)
key to select gate
time Background
It is the threshold to recalculate
frequency/period. Slower the gate
time, e.g., 1s, more accurate the
reading value.
Press the F2 key to enter gate time
menu. Click the F1 – F3 key for the
desired gate time. See the figure below
with available options.
F4 (InJack) key to
select voltage or
current Background
I
n accordance with the target inputs,
choose the corresponding selection
per condition. E.g., select “3A” when
the input current is below 3A
amplitude.
Press the F4 (InJack) key to determine
whether the voltage or current 3A or
current 10A (RSDM-9061 only) to be
measured. Press the F1 – F3 key to
select desired option. See the figure
shown below with options available.
F5 (Time Out) key
to select timeout
Background It defines the exact value for
timeout, which means measurement
will be suspended after reaching the
set timeout value when none of
input is detected.