RS PRO RSDM-9060, User Manual

Page: 313 / 412

313
continuously changes). If your application requires
autoranging, specify DEFault for the <resolution> or omit the
<resolution> altogether.
Secondary Display: CONFigure2 Commands
CONFigure2[:VOLTage]:DC
Sets measurement to DC Voltage on the 2
nd
display and specifies
range/resolution.
Parameter: [None] | [Range(<NRf> | AUTO | MIN | MAX |
DEF)[,Resolution(<NRf> | MIN | MAX | DEF)]]
Example: CONF2:VOLT:DC 1,MAX
Sets the voltage range to 1 volt and the resolution to the maximum.
●
Autoranging (AUTO or DEFault), will generate an error if you
specify a <resolution> because the instrument cannot accurately
resolve the integration time (especially if the input continuously
changes). If your application requires autoranging, specify DEFault
for the <resolution> or omit the <resolution> altogether.
CONFigure2[:VOLTage]:AC
Sets measurement to AC Voltage on the 2
nd
display and specifies
range.
Parameter: [None] | [Range(<NRf> | AUTO | MIN | MAX | DEF)]
Example: CONF2:VOLT:AC
Sets the measurement mode to AC voltage on the 2
nd
display.
CONFigure2:CURRent[:DC]
Sets measurement to DC Current on the 2
nd
display and specifies
range/resolution.
Parameter: [None] | [Range(<NRf> | AUTO | MIN | MAX |
DEF)[,Resolution(<NRf> | MIN | MAX | DEF)]]
Example: CONF2:CURR:DC 10e-3,DEF
Sets the DC current range to 10mA using the default resolution on
the 2
nd
display.
●
Autoranging (AUTO or DEFault), will generate an error if you
specify a <resolution> because the instrument cannot accurately
resolve the integration time (especially if the input continuously
changes). If your application requires autoranging, specify DEFault
for the <resolution> or omit the <resolution> altogether.