RS PRO RSDM-9060, User Manual

Page: 284 / 412

284
rspro.com
<NR3>
floating point with
exponent
4.5e-1, 8.25e+1
<NRf>
any of NR1, 2, 3 1, 1.5, 4.5e-1
[MIN]
(Optional
parameter)
For commands, this will set the
setting to the lowest value. This
parameter can be used in place of any
numerical parameter where
indicated.
For queries, it will return the lowest
possible value allowed for the
particular setting.
[MAX]
(Optional
parameter)
For commands, this will set the
setting to the highest value. This
parameter can be used in place of any
numerical parameter where
indicated.
For queries, it will return the highest
possible value allowed for the
particular setting.
DEF
For commands, this will set the
setting to the default value. This
parameter can be used in place of any
numerical parameter where
indicated.
For queries, it will return the default
value allowed for the particular
setting.
Automatic
parameter range
selection
The RSDM-9060/9061 automatically sets the
command parameter to the next available value.
Example
conf:volt:dc 3
This will set the measurement item to
DC Voltage and the range to 10V.
There is no 3V range so the DMM
selects the next available range, 10V.