RS PRO RSDM-9060, User Manual

Page: 150 / 412

150
rspro.com
Application: 4094 / User Mode
Overview
4094 and User mode can only used when using a
remote control interface. Likewise this mode can
only be enabled or disabled via remote control.
Please see the digital I/O commands on page 259
for full usage details.
User Mode – IO (Output) Mode
Overview
It is the mode utilizing output as general IO
(Output) usage with up to 4 pins available for use
simultaneously. Refer to the following
introductions along with diagrams for more
details. Please see the digital I/O commands on
page 259 for full usage details.
Related
Commands
DIG:INT:MODE IO (switch to IO mode)
DIG:INT:DATA:SET 0,1,1,0
=> OUT1(Pin5) : +0V
OUT2(Pin6) : +5V
OUT3(Pin7) : +5V
OUT4(Pin8) : +0V
Pin Assignment Pin No User Mode Description
1 VCC Out Option(Vcc:+5V)
2 Flyback Diode No Use
3 Digital Ground GND
5 OUT1 Use
6 OUT2 Use
7 OUT3 Use
8 OUT4 Use