RS PRO RSDM-9060, User Manual

Page: 341 / 412

341
SENSe FREQency Commands
[SENSe:]FREQuency:APERture
Sets the aperture time (gate time) for the frequency function
(0.01s, 0.1s, 1s).
Parameter: <NRf> (0.01 | 0.1 | 1)
Example: SENS:FREQ:APER 0.01
Sets the gate time to 0.01 seconds.
[SENSe:]FREQuency:APERture?
Returns aperture time (gate time) for the frequency function.
Return parameter: <NRf>
[SENSe:]FREQuency:CURRent:RANGe
Sets the frequency measurement range.
Parameter: Range(<NRf> | MIN | MAX | DEF)
Example: SENS:FREQ:CURR:RANG MIN
Sets the frequency to the minimum range.
[SENSe:]FREQuency:CURRent:RANGe?
Returns the frequency measurement range.
[SENSe:]FREQuency:CURRent:RANGe:AUTO
Sets the Frequency Auto-range settings on, off or once.
Parameter: 0 | 1 | ON | OFF | ONCE
Example: SENS:FREQ:CURR:RANG:AUTO ON
Turns the Auto-range on for the frequency function.
[SENSe:]FREQuency:CURRent:RANGe:AUTO?
Returns the frequency Auto-range setting.
Return parameter: 0 | 1, 0=OFF, 1=ON
[SENSe:]FREQuency:INPutjack
Assigns an input port for the frequency function.
Parameter: <NR1> (0 | 1 | 2), 0=Voltage, 1=3A, 2=10A
Example: SENS:FREQ:INP 0
Sets the input jack to the Voltage input port.
[SENSe:]FREQuency:INPutjack?
Returns the assigned input port used for the frequency
function.
Return Parameter: VOLT | 3A | 10A
[SENSe:]FREQuency:NULL[:STATe]
Sets the relative function on/off for Frequency measurement.
Parameter: 0 | 1 | ON | OFF
Example: SENS:FREQ:NULL:STAT ON
Turns the relative function on for Frequency measurement.