RS PRO RSDM-9060, User Manual

Page: 121 / 412

121
The display shows as the figure below.
Press the F2 (Pass) or F3 (Fail) key to
determine the condition of beep alarm.
or
Press the F1 (Off) key to disable beep
mode.
F4 (BeepVol) to
select beep
volume
Press the F4 (BeepVol) key to enter the
beep volume setting.
Select the intensity of beep volume via
pressing F1 – F3 key for desired level
as the figure shown below.
or
or
Compare mode
result
When the measured result is within the range of
high and low limit, the display shows as the figure
below with purely black background indicating
the state of “Pass”.
However, when measured result is either above or
less than the limit range, the display appears as the
figure below with boldly red background
indicating the state of “Fail”.