RS PRO RSDM-9060, User Manual

Page: 310 / 412

310
rspro.com
specify a <resolution> because the instrument cannot
accurately resolve the integration time (especially if the input
continuously changes). If your application requires
autoranging, specify DEFault for the <resolution> or omit the
<resolution> altogether.
CONFigure[:VOLTage][:DC]:RATio
Sets measurement to DCV ratio mode on the 1
st
display and
specifies range/resolution.
Parameter: [None] | [Range(<NRf> | AUTO | MIN | MAX |
DEF)[,Resolution(<NRf> | MIN | MAX | DEF)]]
Example: CONF:VOLT:DC:RAT 1
Sets the DC voltage range to 1V using the default resolution.
●
Autoranging (AUTO or DEFault), will generate an error if you
specify a <resolution> because the instrument cannot
accurately resolve the integration time (especially if the input
continuously changes). If your application requires
autoranging, specify DEFault for the <resolution> or omit the
<resolution> altogether.
CONFigure[:VOLTage]:AC
Sets measurement to AC Voltage on the 1
st
display and
specifies range.
Parameter: [None] | [Range(<NRf> | AUTO | MIN | MAX | DEF)]
Example: CONF:VOLT:AC
Sets the AC voltage range to auto range.
CONFigure:CURRent[:DC]
Sets measurement to DC Current on the 1
st
display and
specifies range/resolution.
Parameter: [None] | [Range(<NRf> | AUTO | MIN | MAX |
DEF)[,Resolution(<NRf> | MIN | MAX | DEF)]]
Example: CONF:CURR:DC 10e-3,DEF
Sets the DC current range to 10mA using the default
resolution.
●
Autoranging (AUTO or DEFault), will generate an error if you
specify a <resolution> because the instrument cannot
accurately resolve the integration time (especially if the input
continuously changes). If your application requires
autoranging, specify DEFault for the <resolution> or omit the
<resolution> altogether.