RS PRO RSDM-9060, User Manual

Page: 314 / 412

314
rspro.com
CONFigure2:CURRent:AC
Sets measurement to AC Current on the 2
nd
display and specifies
range.
Parameter: [None] | [Range(<NRf> | AUTO | MIN | MAX | DEF)]
Example: CONF2:CURR:AC 10e-2
Sets the measurement mode to AC Current with a 100mA range on
the 2
nd
display.
CONFigure2:FREQuency
Sets measurement to Frequency on the 2
nd
display and specifies
range.
Parameter: [None] | [Range(<NRf> | AUTO | MIN | MAX |
DEF)[,Resolution(<NRf> | MIN | MAX | DEF)]]
Example: CONF2:FREQ MAX
Sets the frequency range to max on the 2
nd
display.
CONFigure2:PERiod
Sets measurement to Period on the 2
nd
display and specifies the
range.
Parameter: [None] | [Range(<NRf> | AUTO | MIN | MAX |
DEF)[,Resolution(<NRf> | MIN | MAX | DEF)]]
Example: CONF2:PER
Sets the measurement mode to period measurement using the auto
range on the 2
nd
display.
CONFigure2:OFF
Turns the 2
nd
display function off.
Parameter: [None]
DATA Commands
DATA[X]:LAST?
Returns the last measurement value with units taken. You can
execute this query at any time, even during a series of
measurements.
X = null or 1 indicate 1
st
display value, X = 2 indicate 2
nd
display
value
Return parameter: <NRf>, Ex: +0.1501 VDC
● If no data is available, +9.9137 (Not a Number) is
returned with units