RR Mechatronics STARRSED TL, Instructions For Use Manual

Page: 29 / 137

▪ Sample ID:
The sample identification (barcode) of the sample tube.
▪ Dilution:
The dilution rate of this sample as calculated during the aspiration process.
▪ Time filled:
The date and time when the sample was aspirated.
▪ Time to go:
The number of minutes to wait until the sample will be measured.
The indicators at the right side show the current status of the selected pipette:
▪ Pipette filled OK:
A sample has been aspirated into the pipette without problems.
▪ Pipette dirty:
The sample has been measured and the pipette is marked to be washed when it reaches the rinse
station. This indicator is also on when a sample could not be aspirated properly.
5.3 - History screen
In History the following options can be selected:
▪
Display pipette data
Use button
Print
to send the selected data to the printer.
▪
Display sample history
▪
Display full patient result
In Display sample history are the following options available:
Print
: Send the selected result to the printer.
Print result header
: Only if option Settings-General settings "
Print after measurement
" is switched ON it is
possible to print a result header.
Starrsed TL program
MRN-164_2-EN Version 1.08 Starrsed TL
29