RR Mechatronics STARRSED TL, Instructions For Use Manual

Page: 50 / 137

▪ Check Flow sensor: Click the Check button, the OK sign is shown if the sensor value is in range.
▪ Check liquid sensor: Press test. When test is finished, the OK signs are shown at Rinse and Drain if the
liquid sensor is active.
▪ Check Measure sensor:
Clean sensor first before executing this function.
Click the Check button, the OK sign is shown if the sensor value is in range.
Press the button
Measure
. The pipette currently at the measure position will be measured.
The results are displayed in graphical form:
Measure head start
position correct
Measure head start
position wrong
NOTE:
When a test pipette is installed at the measuring position the result of the test pipette is displayed in the
field "ESR (mm)".
When the sensor is out of range and a red "X" is shown, the sensor values can be
checked by turning on the service mode.
Starrsed TL program
50
MRN-164_2-EN Version 1.08 Starrsed TL