70
Loss of
Analogue
Demand Signal
Over
Partial
Pressure in
Stroke
Mid Travel
Fault
Running in
Actuator
Wrong
Stalled
Direction
Unable to
Actuator
Reach
Stalled in
Pressure
Slow Mode
Help Screen 8
Over Pressure in Mid Travel
Bar On = Actuator operation has
stopped due to an obstruction in mid-
travel
[OP]
.
Running in Wrong Direction
Bar On = Actuator is running in the
wrong direction
[dI]
.
Unable to Reach Pressure
Bar On = Actuator is unable to reach
required pressure
[uP]
.
Actuator Stalled in Slow Mode
Bar On = Actuator is stalled in slow
mode
[SL]
.
Actuator Stalled
Bar On = Actuator movement is stalled
[St]
.
Partial Stroke Fault
Bar On = Actuator has failed to
complete desired movement
[PS]
.
Loss of Analogue Demand Signal
Bar On = Analogue demand signal not
present
[dn]
.
Note: Bar indication is real time and
reactive.
Open
No Expected
Command Movement
Close
De-energise
Command
All
ESD
Inhibit
Command
Command
All Stop
Slow Mode
Command Command
Help Screen A
Open Command
Bar On = Actuator is acting on an Open
command.
Close Command
Bar On = Actuator is acting on a Close
command.
ESD Command
Bar On = Actuator is acting on an ESD
command.
All Stop Command
Bar On = Stop actuator and pump.
Slow Mode Command
Bar On = Actuator is running at a
slower rate.
Inhibit Command
Bar On = Actuator is operating using
the interrupter timer.
De-energise All Command
Bar On = Actuator has command to
de-energise all solenoids.
No Expected Movement
Bar On = Actuator has no commands
to move.
Note: Bar indication is real time and
reactive.
Error Flags 2
H8
Cr
HP
Driver Logic
H9
Cr
HP
