24
The actuator can be configured to
either open on Pressure (hydraulic or
spring) for back seating valves or Limit
for non-back seating valves.
50
m
50
m
P?
k
PC
k
bt
k
Pt
k
Ft
m
Cr
m
C2
k
C3
m
CP
k
cP
k
OP
k
oP
m
LC
k
LO
m
50
Refer to valve manufacturer for
recommended setting.
[OL]
Stop on Limit (Default)
[OP]
Stop on Pressure
To change the function press the
+
or
-
key until the required setting is
displayed.
PRESS THE
KEY
.
The displayed option will flash (stored),
indicating that it has been set.
Open Action
C3
Open Action
Stop on Limit
Torque
This setting allows the maximum cut-off
pressure in a normally open actuator
while travelling from the closed electrical
limit to the closed mechanical end stop
to be set. The value set is a % of the
maximum available pressure, which is
limited by the pressure relief valve.
50
m
50
m
P?
k
PC
k
bt
k
Pt
k
Ft
m
Cr
m
C2
k
C3
m
CP
k
cP
k
OP
k
oP
m
LC
k
LO
m
50
To change this value press the
+
or
-
key until the required setting is
displayed.
PRESS THE
KEY
.
The displayed option will flash (stored),
indicating that it has been set.
Close Pressure at Limit
CP
Close Pressure
at Limit
90%
Torque
