20
7
Commissioning
continued
In setting mode the Setting Tool
+
or
-
keys will cause the setting to be
changed. In checking mode the settings
cannot be altered.
In setting mode, once displayed, a new
setting can be entered into the actuator
memory by pressing the
key.
The setting will flash off and back on,
confirming its selection, and "
Stored
"
will be displayed for 2 seconds in the
text display.
TOP LEFT
PORTION
Function e.g.
OP = Open Pressure
TOP RIGHT
PORTION
Function Setting
e.g. Value = 90%
LOWER DISPLAY
Function: Open Pressure
Setting Value: 90%
7.14 Returning to Valve
Position Display
There are five ways of returning to valve
position display:
1. Approximately 5 minutes after the
last Setting Tool operation the
display will automatically return to
position display.
2. Press the
m
and
k
arrow keys
together.
3. Press the
m
arrow key until the
display returns to position.
4.
Press the
i
arrow key to return
to position display.
5. Select Remote control using the
Local/Stop/Remote selector.
Open Pressure
at Limit 90%
