29
Having established that the Basic
Settings have been correctly set, the
Configuration Settings can now be
configured to suit the site control and
indication requirements.
It is possible to move through the
various Configuration Settings as shown
in Fig. 9.1 using the
k
and
m
keys.
The actuator model code will indicate
any options fitted.
In order to display the Configuration
Settings it is necessary to press the
m
key until
[Cr]
appears.
If you have chosen to enter
Configuration Settings in the checking
mode the display will be as Fig. 9.1.
If you have chosen to enter
Configuration Settings in the setting
mode the display will be as Fig. 9.2
Refer to Section 7
.
Fig. 9.1 Fig. 9.2
PRESS THE
k
KEY
.
9.1
Accessing the
Configuration Settings
Basic Setup
Config Setup
Basic Setup
Config Setup
9
Configuration Settings
CONFIGURATION SETTINGS
page
9.1
Accessing Configuration Settings
29
9.2
Indication Contact r1
30
9.3
General Settings
31
9.4
Digital Control
33
9.5
ESD / Partial Stroke Settings
35
9.6
Analogue Control 1
39
9.7
Analogue Control 2
41
9.8
Interrupter Timer
43
9.9 Service
46
9.10 Bus System Option Pakscan
48
9.11 Bus System Option Modbus
51
9.12 Bus System Option Profibus DP
54
9.13 Bus System Option DeviceNet
57
9.14 Bus System Positioning Control Settings
60
