25
Close Pressure at Mid
cP
This setting allows the maximum cut-off
pressure in a normally closed actuator
while travelling from the open electrical
limit to the open mechanical end stop
to be set. The value set is a % of the
maximum available pressure, which is
limited by the pressure relief valve.
50
m
50
m
P?
k
PC
k
bt
k
Pt
k
Ft
m
Cr
m
C2
k
C3
m
CP
k
cP
k
OP
k
oP
m
LC
k
LO
m
50
To change the function press the
+
or
-
key until the required setting is
displayed.
PRESS THE
KEY
.
The displayed option will flash (stored),
indicating that it has been set.
Open Pressure at Limit
OP
Open Pressure
at Limit
90%
Torque
This setting allows the maximum
cut-off pressure in a normally open
actuator while travelling in mid-travel
between the open and closed electrical
limits while closing to be set. If the
value is set to 00, the pressure-off value
from CP is used.
50
m
50
m
P?
k
PC
k
bt
k
Pt
k
Ft
m
Cr
m
C2
k
C3
m
CP
k
cP
k
OP
k
oP
m
LC
k
LO
m
50
To change the function press the
+
or
-
key until the required setting is
displayed.
PRESS THE
KEY
.
The displayed option will flash (stored),
indicating that it has been set.
Close Pressure
at Mid
0%
Torque
