Ross Synergy 2 SD, Installation Manual

Page: 342 / 414

12–16 • Editors/OverDrive Synergy Series Installation Guide (v18)
Insert Special — Special Menu
4. Assign an automation function to the selected custom control macro as follows:
• Use the top knob to select
Automation
.
• Use the Command knob to select the command you want the macro to perform.
You can select between the follow:
~
Keys Off Air
— Select this option when you want all on-air Keys , on all
MLEs , to be dissolved off-air when the custom control is run.
~
Act MLE Trans
— Select this option when you want all MLEs that are
contributing the PGM output, except for the PGM/PST MLE , to be
transitioned according to the settings in the MLE Transition Group . For
example, if MLE 1, of a Synergy 3 Switcher , is re-entered onto MLE 2 and
MLE 2 is re-entered onto MLE 3 , the Active MLE Trans custom control will
perform a transition on both MLE 1 and MLE 2 .
5. Press Insert to insert the selected command into the custom control and display the
Insert Special Menu 1-2 .
6. Insert additional commands if needed. When you have finished inserting commands,
proceed to the next step to complete the procedure.
7. Press UP ONE to display the Recording Menu .
8. Press Finish Recording , or the flashing custom control button, to finish recording to
the selected custom control. The custom control button will stop flashing.
Once your custom control buttons have been programmed, be sure to properly name them. Refer to
the section “
Naming Custom Controls ” on page 8–42 for more information on naming custom
control buttons.
To play back your macro, exit the Custom Controls Menu and press the custom control button on the
control panel that you recorded the custom control macro to.
Important If you have more than one re-entry set up for a shot, the Active MLE
Trans custom control will transition all on-air MLEs . If you have an
MLE re-entered onto the BKGD bus of another MLE , the Active
MLE Trans custom control will transition the MLE re-entry with
whatever you have selected on the PST bus of that MLE .