Ross Synergy 2 SD, Installation Manual

Page: 226 / 414

8–50 • Custom Control Basics Synergy Series Installation Guide (v18)
7. Press
Insert
to save your changes.
8. Press
UP ONE
to display the Inserting Menu .
Custom Controls — Recording Menu
9. Press
Finish Inserting
to finish inserting to the selected custom control.
This completes the procedure for modifying a custom control event.
Inserting Events
The Insert Events function allows you to insert a number of events into an already existing custom
control. Events are inserted immediately before the event that is currently highlighted.
Use the following procedure to insert an event into a custom control:
1. Navigate to the Custom Controls Menu as follows:
• Press HOME B Custom Controls .
Custom Controls Menu
2. Select the Custom Control bank and button that you want to edit to as follows:
• Use the Bank knob to select the custom control bank that you want to edit the
custom control on.
• Use the Button knob to select the custom control that you wish to edit.
Operating
Tip
Press Cancel Inserting to return to the previous menu without
recording any of the insertions you made.
Note
Only buttons with an asterisk (*) or an “at” (
@
) next to them in the list
are already programmed and can be edited.