Ross Synergy 2 SD, Installation Manual

Page: 314 / 414

10–22 • Completing Setup Synergy Series Installation Guide (v18)
Warning — Reset Installation Registers
• Press
Yes
to reset all Installation Registers to their default values.
• Press
No
to retain the current set of Installation Registers and exit the menu safely.
8. Use the following method to Reset your Custom Control Registers :
• Press
Custom Controls
to display the Reset Custom Controls Warning Screen .
Warning — Reset Custom Control Registers
• Press Yes to reset all Custom Control Registers to their default values.
• Press
No
to retain the current set of Custom Control Registers and exit the menu
safely.
9. Use the following method to Reset your VTR Clip Registers :
• Press
Default VTR Clips
to display the Reset VTR Clip Registers Warning
Screen .
Warning — Reset VTR Clip Registers
• Press Yes to reset the contents of the VTR Clip Registers .
• Press
No
to retain the current set of VTR Clip Registers , and exit the menu safely.
10. Press
MORE
to display Recall Factory Menu 2-2 .
11. Use the following method to Reset the contents of the Non-Volatile RAM (NV-RAM) :
• Press
Default NV-RAM
to display the Reset NV-RAM Warning Screen .