Ross Synergy 2 SD, Installation Manual

Page: 187 / 414

Synergy Series Installation Guide (v18) Custom Control Basics • 8–11
2. Press
MORE
to display the Custom Control Bank Names Menu 2-2 .
Custom Control Bank Names Menu 2-2
3. Use the
Bank number
knob to select the desired Bank Number. The selected bank
name/number is displayed in the mnemonic display area of the menu as you select banks
from the list.
4. Adjust the size of the font that will appear in the mnemonic display as follows:
• Use the
Bank number
knob to select the desired Bank Number.
• Use the
Font
knob to select a size. You can choose from the following:
~ Standard — Select this option to change the font size as defined in the
Personality Menu .
~ Small — Select this option to permit up to 6 characters per line.
~ Small Invert — Select this option to permit up to 6 characters per line, and
draw light text on a dark background.
~ Medium — Select this option to permit up to 4 characters per line.
~ Medium Invert — Select this option to permit up to 4 characters per line, and
draw light text on a dark background.
~
Large
— Select this option to permit only 2 characters.
~
Large Invert
— Select this option to permit only 2 characters, and draw light
text on a dark background.
Operating
Tip
A Standard PS/2 keyboard can be used to perform the same actions as
pressing or rotating the
System Control buttons and knobs. Refer to
the section, “ Using The Keyboard ” in the Synergy Series Operation
Guide for details.
Important Do NOT place anything on your keyboard or place your keyboard in a
position where any of the keys could be accidently pressed. This could
result in the Switcher acting unpredictably.