Ross Synergy 2 SD, Installation Manual

Page: 200 / 414

8–24 • Custom Control Basics Synergy Series Installation Guide (v18)
8. Press
Finish Recording
, or the flashing custom control button, to finish recording to
the selected custom control. The custom control button will stop flashing.
Once your custom control buttons have been programmed, be sure to properly name them. Refer to
the section “
Naming Custom Controls ” on page 8–42 for more information on naming custom
control buttons.
To play back your macro, exit the Custom Controls Menu and press the custom control button on the
control panel that you recorded the custom control macro to. Any recorded custom control can be
edited. Refer to the section “
Editing Custom Control Macros ” on page 8–47 for details.
Automation
Use the Automation function to create custom controls that accept commands from an external
automation system.
Use the following procedure to create an Automation custom control macro:
1. Navigate to the Custom Controls Menu as follows:
• Press
HOME B Custom Controls
.
Custom Controls Menu
2. Select the custom control button you want to record to as follows:
• Use the
Bank
knob to select the custom control bank you want to record the custom
control to.
• Use the
Button
knob to select the custom control button that you want to record a
custom control macro to. You can also press the desired button directly on the
control panel. Remember that buttons marked with an asterisk (*) in the list have
already been programmed.
3. Navigate to the Special Menu as follows:
• Press Start Recording
B
Insert Special
B
Special .
Operating
Tip
As a recommendation, keep special functions grouped together on
your
physical custom control buttons.