Ross Synergy 2 SD, Installation Manual

Page: 223 / 414

Synergy Series Installation Guide (v18) Custom Control Basics • 8–47
Editing Custom Control Macros
After your custom control buttons have been programmed, you may wish to review and edit the
contents. Events can easily be inserted or deleted through the
Custom Controls Menu .
The Custom Controls Menu displays the following information:
• The Main Area displays the location of the custom control that you are editing, such as
Bank 1 Button 1 [Custom01] , and the contents of the custom control, including the
number of events, the duration of the macro, and details of the event highlighted in the
scroll area.
• The Scroll Area provides a list of the events currently programmed into the custom
control button.
• The Label Area provides softkeys for inserting, deleting, and running the events, as
required.
Use the following procedure to edit a custom control button:
1. Navigate to the Custom Controls Menu as follows:
• Press HOME B Custom Controls .
Custom Controls Menu
2. Select the Custom Control bank and button that you want to edit as follows:
• Use the Bank knob to select the custom control bank that you want to edit the
custom control on.
• Use the Button knob to select the custom control that you wish to edit.
3. Press Edit to display the Edit Custom Control Menu .
Note
If the custom control has been programmed to recall a memory, as in
the example below, the memory name is displayed in the
Main Area .
If memories from more than one MLE are being recalled, the name
from the highest MLE is displayed.
Note
Buttons with an asterisk (*) or an “at” ( @ ) next to them in the list are
already programmed and can be edited.
Note
If you are editing a relative custom control,
<relative>
will appear
next to the Bank and Button identification and the relative MLE level
(
R LVL
) will be displayed instead of the MLE number.