Ross Synergy 2 SD, Installation Manual

Page: 279 / 414

Synergy Series Installation Guide (v18) Additional Installation Setups • 9–49
DSK Setup Menu
The menu lists each DSK crosspoint, its lock/unlock status, the crosspoint’s name, and the selected
key type.
Capturing and Storing a DSK Setup
Use the following procedure to capture and store the DSK setup:
1. Ensure that your DSK crosspoints are programmed as desired. If not, refer to section
“ Programming DSK Crosspoints ” on page 9–45.
2. Toggle the Show DSK1/DSK2 button to choose the DSK that you wish to store.
3. Press Grab Both DSKs to update the menu with the current state of the selected DSK.
This action stores the settings in memory.
This completes the procedure to capture and store the DSK setup.
Changing a DSK Crosspoint Lock Status
Use the following procedure to change a DSK crosspoint’s lock/unlock status:
1. Toggle the
Show DSK1/DSK2
button to choose the desired DSK.
2. Use the top Knob to select the desired crosspoint (1 through 8).
3. Use the middle Knob to select either
Unlock
or
Lock
. This action changes the
crosspoint’s label in the main menu area.
4. Repeat steps 1 through 3 for all crosspoints that you wish to change.
5. If desired, press
Grab Both DSKs
to update the stored settings.
This completes the procedure to change a DSK crosspoint’s lock/unlock status.
DSK 3/4 (CDK-111A-M) Setup
The Synergy switcher can utilize up to two optional DSK 3/4s (CDK-111A-Ms) that are installed in
Ross Video’s DFR-8110A-C and DFR-8104A-C DA frames. Each DSK 3/4 has
Self and Auto Select
key capabilities only. Borders, DVE Send transitions and Squeeze and Tease capability are not
provided with external DSKs.
Note
This equipment is to be installed and serviced by qualified personnel
only. All cautionary rules regarding static discharge apply. Refer to the
section “
Static Discharge ” on page 2–2 for details.