Manual
Double Sheet Detector-series I20
B0069991 / Rev. 1.7
Start-up
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
75
7.4.4
Sub structure “System configuration” (details in 7.9)
Fig. 34: Sub structure configuration
System parameter
Language
german / english / italian / french / spanish
Delete Prog.Para.
no / yes
Password active
no / yes
not available
1, 2, 3, 4 (according to system version)
Measuring mode
ext. single meas. / demo mode / ext. continuous meas. / ext. special
Hold 2-sheet
yes / no
not available
Output level 0-1-2
0VDC / +24VDC
External adjust
yes / no
Diagnostic
factor / thickness range
System info
versions of Software, Hardware-Proc.-board, Hardware-Analog-board
Dimension
mm / inch (for system type “standard”) /
% (for system type “non standard”)
System type
Standard / FE+AL 0,5 - 3 mm / FE+AL 0,1 - 0,8 mm /
FE + Austenit 0,1 - 1 mm / FE + Austenit 0,5 - 3 mm /
Frequency / Damping mode
Indication Time
0,0 - 2 seconds holding time
Password
0000 - 9999
Default settling time
2 / 4 / 8 / 15 / 25 / 100 / 250 ms
IN/OUT PLC voltage
– monitoring
– no monitoring
Internal system zero
only for Service personnel
not available
not available
Compensation factor
scheduled
not available
Auto. Prog.select
yes / no
Internal system gain
only for Service personnel
not available
Sensor type
IS/IE42-30GS / IS/IE30-20GS / ISQ/IEQ42S / ISQ/IEQ160S
