Manual
Double Sheet Detector-series I20
B0069991 / Rev. 1.7
Technical data
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
11
2.3.2
Sensor pair IS42-30GS / IE42-30GS*
Technical data
Application:
Double sheet detection
Sheet thickness:
0.15 – 8 mm
for steel
0.1 – 10 mm
for Aluminum (LW 20 – 30 MS/m):
0.4 – 10 mm
for austenitic Stainless steel
at nom. sensor distance (min. / max.)
40 (20 – 80) mm
40 (20 – 80) mm
40 (20 – 80) mm
Sensor distance:
see sensor diagrams
Measurement principle: Eddy current
Protection class:
IP54
Weight:
ca. 0.45 kg (1 lbs)
Material of enclosure:
Stainless steel / Brass, Nickel plated
Sensor cable:
Quick disconnect
* Transmitter ISQ42. and receiver IE42-30.. may be also used as a sensor pair. Please refer to
chapter 4.3.1 for an example.
2.3.3
Sensor pair ISQ42S / IEQ42S*
Sensor pair ISQ42FS / IEQ42FS*
Technical data
Application:
Double sheet detection
Sheet thickness:
0.15 – 8 mm
for steel
0.1 – 10 mm
for Aluminum (LW 20 – 30 MS/m):
0.4 – 10 mm
for austenitic Stainless steel
at nom. sensor distance (min. / max.)
40 (20 – 80) mm
40 (20 – 80) mm
40 (20 – 80) mm
Sensor distance:
see sensor diagrams
Measurement principle: Eddy current
Protection class:
IP54
Weight:
ca. 0.50 kg (1.1 lbs)
Material of enclosure:
Plastic
Sensor cable:
ISQ / IEQ42S: Quick
disconnect
ISQ / IEQ42FS:
0,2 m, cable firmly connected, with cable plug
* Transmitter ISQ42S and receiver IE42-30S, respectively transmitter IS42-30S and receiver
IEQ42S may be also used as a sensor pair. Please refer to chapter 4.3.1 for an example.
2.3.4
Sensor pair ISQ160S / IEQ160S
Technical data
Application:
Part inspection, Material inspection, Hardness inspection
Sheet thickness:
Depending on the application
Sensor distance:
20 – 80 mm (depending on the application)
Measurement principle: Eddy current
Protection class:
IP54
Weight:
ca. 0.50 kg (1.1 lbs)
Material of enclosure:
Plastic
Sensor cable:
Quick disconnect
Note
The stated measurement ranges are only valid for systems in „Standard“
setting. For details refer to chapter 3.2.
