Manual
Double Sheet Detector-series I20
Start-up
B0069991 / Rev. 1.7
76
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
7.5 General
information
regarding the configuration
Note
The correct configuration depends on the communication with the PLC,
on the measurement task and the connected components.
The following rules apply to the operation in the configuration mode:
• The configuration mode is activated (while in measurement mode) by pressing the
MENU
key.
• The configuration mode is terminated or cancelled by pressing the
MENU
key.
• The selected / set parameters can be changed when the items are blinking in the display.
• The selected / set parameters are activated by pressing the
ENTER
key.
Note
The systems info and bus info is displayed by pressing the
ENTER
key in
the base menu (compare also system parameter 27).
7.6
Changing, setting-up or checking the configuration
In order to select, set-up or check the system / program parameters, press the
MENU
key.
Here either reviewing or changing the configuration can be selected.
Configuration review:
The program / adjust / system parameters cannot be changed.
The measurement mode is not interrupted.
Fig. 35: Indication after calling-up the menu
Configuration change:
All program / adjust / system parameters can be changed after
entering the password. The following menu option is shown.
configuration
review