DSE RH-BCC1 User Manual Download

Page: 1 / 82

USER MANUAL

CAMERAS IP H.264 1080P FULLHD

Page:

DSE SRL - ITALY - WWW.DSE.EU

RH-TCC1 BCC1 RH-RH-DCC1

IP Cameras Full HD 1080p H.264

Introduction

The RH series consists of IP network cameras with H.264 compression and maximum FULL HD

1920x1080 resolution. The units are connected to a LAN via RJ45 port as any PC or other

device and the images are displayed on the PC on the network using a standard Internet

browser or special registration programs. applications are also available for access by

smartphone.

The megapixel resolution allows image detail not

attainable with analog systems. The format 16: 9 Full HD, now an established television standard, is the new dimension of

surveillance, optimal for viewing on wide screen TV or monitor. The RN series of network equipment using H.264 compression, the

latest evolution in digital video compression that allows fidelity and bandwidth economy.

The RH Series cameras support ONVIF protocol 1 and 2 and are compatible with any IP recording software or network video

recorder (NVR) multiprotocol. And 'it is including network recording software for Windows XP / Vista / 7.

Summary of Contents for RH-BCC1



















































































Search results

Summary of Contents for RH-BCC1

Reviews:

Related manuals for RH-BCC1

Brands by name

Popular brands

DSE RH-BCC1, User Manual

Search results

Summary of Contents for RH-BCC1

Reviews:

Related manuals for RH-BCC1

Brands by name

Popular brands