Roland Camm-1 Pro GX-300, User Manual

Page: 65 / 84

63
Menu Function Range Default
OVER This cuts an excess margin of 1 mm (0.04 in.) from the DISABLE/ENABLE DISABLE
CUT first and last line segments.
This selection is normally set to [DISABLE], and is set
to [ENABLE] when cutting especially attractive corners
is desired. When cutting small text or intricate
graphics, however, this should be set to [DISABLE] to
avoid cutting the text or graphics portion of material.
CALIB This adjusts the respective distances of the X axis and -2.00 to 2.00 % 0.00 %
Y axis. Compare the actual measurements of the (0.01 % step)
cutting results with the data sent from the computer to
calculate and set the distance adjustment value.
REPLOT [START] - -
Performs cutting using the data in the replot memory.
[CLEAR]
Deletes the data in the replot memory.
MEMORY This stores the cutting conditions to match the blade USER1 ~ 8 -
and material in use. You can set the following five types
of parameters: [SPEED], [OFFSET], [FORCE],
[UPSPEED] and [QUALITY]. These settings can be
stored in memory as eight patterns (numbered USER1
through 8).