Roland Camm-1 Pro GX-300, User Manual

Page: 31 / 84

29
To Change the Cutting Speed or Blade Force During Cutting
If you change the cutting speed or blade force during cutting, carry out the operation described below.
You can also perform fine adjustment in blade force while cutting is in progress by using the [PEN FORCE] slider.
For information on how to do this, see “3-3 Adjusting the Blade Force and Cutting Speed.”
1
Press the [PAUSE] key.
The cutting operation pauses and the screen shown in
the figure appears.
2
If you want to change the cutting speed, press the
[SPEED] key. If you want to change the blade force,
press the [FORCE] key.
3
Use the [ ] and [ ] key to change the value.
4
Press the [ENTER] key to enable the settings.
The display flashes several times, then returns to the
screen shown in the figure.
5
To resume cutting, press the [PAUSE] key.
To quit cutting, first stop sending the cutting data from
the computer, then hold down the [ENTER] key for
0.5 second or longer.
CONTINUE PAUSE
STOP ENTER
SPEED 20cm/s
*20cm/s
SPEED 20cm/s
*22cm/s
CONTINUE PAUSE
STOP ENTER