Roland Camm-1 Pro GX-300, User Manual

Page: 35 / 84

33
HEAVY NORMAL HI-SPEED
Emphasis
on Quality
Priority
on Speed
• When you want
cutting to be as
attractive as possible
• When heavy material
is loaded
• When you want to cut
as rapidly as possible
(used together with
cutting speed)
3
Press the [ ] key several times.
4
Press the [ ] key.
Use the [ ] and [ ] keys to enter the up speed.
5
Press the [ENTER] key to enable the up speed.
Press the [MENU] key to go back to the screen shown
in the figure.
Settings for Cutting Quality
You can select whether speed is given priority in cutting, or whether cutting quality is emphasized.
This is also effective in preventing misalignment and motor errors when cutting heavy material.
1
Press the [MENU] key several times until the screen
shown in the figure appears.
2
Press the [ ] key.
Press the [ ] key.
3
Press the [ ] key.
4
Press the [ ] key.
Use the [ ] and [ ] keys to select the cutting
quality.
5
Press the [ENTER] key to enable the cutting quality.
Press the [MENU] key to go back to the screen shown
in the figure.
UPSPEED AUTO
UPSPEED AUTO
*50cm/s
20cm/s
50gf 0.250mm A
UNSETUP
FORCE 50gf
QUALITY NORMAL
20cm/s
50gf 0.250mm A
QUALITY NORMAL
*HEAVY
Setting range:
NORMAL, HEAVY, HI-SPEED
Adjusting Cutting Quality
Setting range:
AUTO, 10 to 50 cm/s (in
increments of 10 cm/s)
Adjusting the Up Speed