Rockwell Automation 9VT201-007HTNNN, User Manual, Page: 191 / 224

Using the LCD OIM B-15
Publication 9VT-UM001D-EN-P
Save User Set 1-3: Saves the active configuration to drive memory. The
drive responds as if a value had been entered in Save to User Set (199) or
Save to User Set was selected from the OIM’s Memory Storage menu.
Acc/Dec Change: Toggles between the display of Acc/Dec rate 1 and
Acc/Dec rate 2 (The value the drive is configured to go to, not the current
value being used by the drive). This selection is based on the active
value of the rate parameters (140-143). Therefore, when any of these
parameters change, the actual acc/dec rates will dynamically change.
Preset Speed 1-6: Toggles the selected preset speed on and off and grants
Hand (manual) reference control. Returns to Auto reference when the
function is toggled.
View Fault Queue: Displays the Fault Queue screen (see Chapter 4 ).
Press to return to the process display screen.
Next: (Frames 2 and 3 only) Togle to net set of three process display
variables.
Customizing the Function Key Label Text
You can customize the text for each function key label (up to five
characters). See
Figure B.14 .
ESC/
PROG