Rockwell Automation 9VT201-007HTNNN, User Manual, Page: 69 / 224

Programming and Parameters 3-7
Publication 9VT-UM001D-EN-P
Figure 3.5 Setting the Write-Protect Password
When you enter the password, you can adjust parameters until you select
Logout or return to the process display screen, which re-activates the
password. Refer to
Appendix B for information about the process
display screen.
If There is More Than One OIM Connected to the Drive
Important: Setting the write-protect password value to zero on one
OIM will disable the write-protect password on all
connected OIMs.
Setting the write-protect password in one OIM will not affect any other
OIM connected to the drive unless a write-protect password has also
been set in the other OIMs. In this case, the last password value entered
becomes the password value for all password-protected OIMs. (Each
OIM cannot have a different password value.)
For example, if the write-protect password has been set to 5555 for the
local OIM, someone using a remote OIM with no write-protect password
set can still program all of the parameters. If the write-protect password
is then set to 6666 on the remote OIM, you will be required to enter 6666
on the local OIM to program the parameters.
Auto Stopped
Main Menu
Password
P0: VTAC 9
Password:
Set Acc Lvl PW
Set Wrt Prot PW
Set Access Lvl
Set Wrt Prot PW:
0
New Code:
Increase/decrease value
Move placeholder
Accept value
Highlight option Highlight Password icon
Monitor Lang