Rockwell Automation 9VT201-007HTNNN, User Manual, Page: 189 / 224

Using the LCD OIM B-13
Publication 9VT-UM001D-EN-P
Displaying and Changing the OIM Reference
You can display the reference value that the OIM is sending to the drive
by pressing the up or down arrow key once when the process display
screen is active. See
Figure B.11 . The OIM reference can be used for the
speed reference, PI reference, or trim reference.
To change the displayed reference, press and hold down either the up or
down arrow key until the desired value is displayed. Release the key to
return to the process display screen.
Figure B.11 OIM Reference Displayed
Note that changing the value of the OIM reference does not affect the
value of any other port reference.
The value of the OIM reference is saved through a power cycle if
parameter 192 (Save OIM Ref) is set to save at power down.
Customizing the Process Display Screen
To customize the process display screen, select Monitor from the
Display menu. See
Figure B.12 .
Figure B.12 Customizing the Process Display Screen
P0: VTAC 9
Auto Stopped
Fltq
0.00 Volts
Amps
Hz
0.00
0.00
OIM Ref
0.00 Hz
Monitor Lang
P0: VTAC 9
Auto
Stopped
Main Menu
Display
Display:
Language
Function Keys
Monitor
Dispy: Dspy Ln#
Scale:
Text:
Par: #
Param Scale Text Save
Use
to select display line
1, 2, 3, 4, 5, or 6
Press F4 to save
Adjust scale
Accept scaling value
Scroll through parameter
numbers
Select parameter
Move through label text
Move through letters
and symbols
F3
Toggle between upper
and lower case