Rockwell Automation 9VT201-007HTNNN, User Manual, Page: 116 / 224

3-54 Programming and Parameters
Publication 9VT-UM001D-EN-P
Inputs & Outputs File
F
ile
Gr
oup
No.
Parameter Name and Description
See page 3-2 for symbol descriptions
Values
Re
la
te
d
INPUTS & OUTPUTS
Ana
log
Inpu
ts
320 [Anlg In Config]
Selects the type of input signal being used for [Analog In 1] and [Analog In 2].
Note: If bit 1 is set to 0 “Voltage” you must set parameters 322 and 323 to rescale
voltage.
322
323
321 [Anlg In Sqr Root]
Enables/disables the square root function for each input.
This function should be enabled if the input signal varies with the square of the
quantity (i.e., drive speed) being monitored. The square root function is scaled
such that the input range is the same as the output range. For example, if the
input is setup as a unipolar voltage input, then the input and output ranges of the
square root function will be 0-10 volts.
0 x x 1 x x x x x x x x x x x x
10 0 1 2 3 4 5 6 7 8 9 11 12 13 14 15
1 =Current
0 =Voltage
x = R eserved
Bit #
Factory Default Bit Values
A
nalog In 1
A
nalog In 2
N ibble 1 N ibble 2 N ibble 3 N ibble 4
0 x x 0 x x x x x x x x x x x x
10 0 1 2 3 4 5 6 7 8 9 11 12 13 14 15
1 =Enable
0 =Disable
x = R eserved
Bit #
Factory Default Bit Values
A
nalog In 1
A
nalog In 2
N ibble 1 N ibble 2 N ibble 3 N ibble 4