Rigol DSA1000A Series, Programming Manual

Page: 73 / 174

Chapter 2 Command Systems
RIGOL
Programming Guide for DSA1000A series 2-59

This file can only be read by the analyzer.
Example :MMEM:STOR:TRAC TRACE3,D:\trace.trc
Front Panel Storage, File Type, Trace, Save
15. :MMEMory:STORe:SETUp
Syntax :MMEMory:STORe:SETUp <file_name>
Function Saves the current settings by specified file (.set).
Explanations

<file_name> must contain a valid path.

If the file name specified already exists, it will be overwritten.
Example :MMEM:STOR:SETU D:\state.set
Front Panel Storage, File Type, Setup, Save
16. :MMEMory:STORe:RESults
Syntax :MMEMory:STORe:RESults <file_name>
Function Saves the current measurement results into a USB flash device with
a specified file name (.csv).
Explanations

<file_name> must contain a valid path.

If the file name specified already exists, it will be overwritten.
Example :MMEM:STOR:RES E:\ACP.csv
Front Panel Storage, File Type, Measure, Save
17. :MMEMory:STORe:MTABle
Syntax :MMEMory:STORe:MTABle <file_name>
Function Saves the marker table into a USB flash device with a specified file
name (.csv).
Explanations

<file_name> must contain a valid path.

If the file name specified already exists, it will be overwritten.
Example :MMEM:STOR:MTAB E:\marktable.csv
Front Panel Storage, File Type, Mark Table, Save
18. :MMEMory:STORe:PTABle
Syntax :MMEMory:STORe:PTABle <file_name>
Function Saves the peak table into a USB flash device with a specified file
name (.csv).
Explanations

<file_name> must contain a valid path.

If the file name specified already exists, it will be overwritten.
Example :MMEM:STOR:PTAB E:\peaktable.csv