Rigol DSA1000A Series, Programming Manual

Page: 89 / 174

Chapter 2 Command Systems
RIGOL
Programming Guide for DSA1000A series 2-75
The query returns
“900000000,0.300000,1000000000,0.350000,
1300000000,0.200000”.
Explanations

<n> is 1 (Antenna), 2 (Cable), 3 (Other) or 4 (User).

<freq> is related to the current analyzer model, the unit is Hz.

<rel_ampl> ranges from -120 dB to 100 dB.

The editable numbers of points range from 1 to 200.
Front Panel AMPT, Corrections, Select, Off/Antenna/Cable/Other/User, Edit,
Point/Frequency/Amplitude/Del Point
9. [:SENSe]:CORRection:CSET<n>:DATA:MERGe
Syntax [:SENSe]:CORRection:CSET<n>:DATA:MERGe
<freq>,<rel_ampl>{,<freq>,<rel_ampl>}
Function Adds new correction data upon the current correction curve.
Explanations For detailed parameter information, please refer to
[:SENSe]:CORRection:CSET<n>:DATA.
10. [:SENSe]:CORRection:CSET<n>:DELete
Syntax [:SENSe]:CORRection:CSET<n>:DELete
Function Deletes the correction settings.
Explanations <n> is 1 (Antenna), 2 (Cable), 3 (Other) or 4 (User).
Front Panel AMPT, Corrections, Select, Off/Antenna/Cable/Other/User, Delete
11. [:SENSe]:CORRection:CSET<n>:X:SPACing
Syntax [:SENSe]:CORRection:CSET<n>:X:SPACing LINear|LOGarithmic
[:SENSe]:CORRection:CSET<n>:X:SPACing?
Function Sets the amplitude correction mode to Lin or Log.
Explanations

<n> is 1 (Antenna), 2 (Cable), 3 (Other) or 4 (User).

In Lin mode, the frequency uses linear and the amplitude uses
logarithm as the unit to make an interpolation operation.

In Log mode, both the frequency and amplitude use logarithm as
the unit to make an interpolation operation.
Default LINear
Front Panel AMPT, Corrections, Freq Interp, Log/ Lin
12. [:SENSe]:CORRection:CSET<n>[:STATe]
Syntax [:SENSe]:CORRection:CSET<n>[:STATe] OFF|ON|0|1