RIGOL
Chapter 2 Command Systems
Programming Guide for DSA1000A series
2-96
Default
2 MHz
Front Panel
Meas, TOI
Meas Setup, Span
89.
[:SENSe]:TPOWer:AVERage:COUNt
Syntax
[:SENSe]:TPOWer:AVERage:COUNt <integer>
[:SENSe]:TPOWer:AVERage:COUNt?
Function
Sets the number of averages of the T-Power measurement results,
such as
:TPOW:AVER:COUN 100
The query returns “100”.
Explanations
<integer> ranges from 1 to 1000.
Default
10
Front Panel
Meas, T-Power
Meas Setup, Avg Num
90.
[:SENSe]:TPOWer:AVERage[:STATe]
Syntax
[:SENSe]:TPOWer:AVERage[:STATe] OFF|ON|0|1
[:SENSe]:TPOWer:AVERage[:STATe]?
Function
Turns on or off the average function of the Time-domain Power
measurement.
The query returns “0” or “1”.
Default
OFF|0
Front Panel
Meas, T-Power
Meas Setup, Avg Num, On/Off
91.
[:SENSe]:TPOWer:AVERage:TCONtrol
Syntax
[:SENSe]:TPOWer:AVERage:TCONtrol EXPonential|REPeat
[:SENSe]:TPOWer:AVERage:TCONtrol?
Function
Sets the average mode of the T-Power measurement.
Explanations
In Exp mode, the result is from the exponent average calculation
of the current N (specified by [:SENSe]:TPOWer:AVERage:COUNt)
measurements.
In REP mode, the result is the arithmetic average of the current N
(specified by [:SENSe]:TPOWer:AVERage:COUNt) measurements.
Default
EXPonential
Front Panel
Meas, T-Power
Summary of Contents for DSA1000A Series
