Rigol DSA1000A Series, Programming Manual

Page: 47 / 174

Chapter 2 Command Systems
RIGOL
Programming Guide for DSA1000A series 2-33
1. :DISPlay:AFUnction:POSition
Syntax :DISPlay:AFUnction:POSition BOTTom|CENTer|TOP
:DISPlay:AFUnction:POSition?
Function Sets the position of active function area.
The query returns “BOTT”, “CENT” or “TOP”.
Explanations This setting is persistent even throuth a power cycle.
Default
TOP
Front Panel Display, Active Fctn, Top/Center/Bottom
2. :DISPlay:ANNotation:CLOCk
Syntax :DISPlay:ANNotation:CLOCk[:STATe] OFF|ON|0|1
:DISPlay:ANNotation:CLOCk[:STATe]?
Function Sets the clock status.
The query returns “0” or “1”.
Explanations This setting is persistent even throuth a power cycle.
Default
ON|1
Front Panel System, Time/Date, Time/Date, On/Off
3. :DISPlay:BRIGtness
Syntax :DISPlay:BRIGtness <integer>
:DISPlay:BRIGtness?
Function Sets the screen brightness, such as
:DISP:BRIG 6
The query returns “6”.
Explanations <integer> ranges from 0 to 7.
Default
6
Front Panel Display, Brightness
4. :DISPlay:ENABle
Syntax :DISPlay:ENABle OFF|ON|0|1
:DISPlay:ENABle?
Function Enables or disables the screen display. The refresh will be stopped
when screen display is disabled, pressing ESC to unlock.
The query returns “0” or “1”.
Default ON|1
Front Panel Display, Scr State, On/Off