Rigol DSA1000A Series, Programming Manual

Page: 98 / 174

RIGOL
Chapter 2 Command Systems
Programming Guide for DSA1000A series 2-84
Function Sets the bandwidth of the main channels, the default unit is Hz, such
as
:ACP:BAND:INT 1000000 or :ACP:BAND:INT 1MHZ
The query returns “1000000”.
Explanations <freq> ranges from 33 Hz to 1 GHz.
Default 2 MHz
Front Panel Meas, ACP
Meas Setup, Main CH BW
48. [:SENSe]:ACPower:BANDwidth:ACHannel
Syntax [:SENSe]:ACPower:BANDwidth:ACHannel <freq>
[:SENSe]:ACPower:BANDwidth:ACHannel?
Function Sets the bandwidth of the adjacent channel, the default unit is Hz, such
as
:ACP:BAND:ACH 1000000 or :ACP:BAND:ACH 1MHZ
The query returns “1000000”.
Explanations <freq> ranges from 33 Hz to 1 GHz.
Default 2 MHz
Front Panel Meas, ACP
Meas Setup, Adj CH BW
49. [:SENSe]:ACPower:CSPacing
Syntax [:SENSe]:ACPower:CSPacing <freq>
[:SENSe]:ACPower:CSPacing?
Function Sets the center frequency difference between the main and adjacent
channels, the default unit is Hz, such as
:ACP:BAND:CSP 1000000 or :ACP:BAND:CSP 1MHZ
The query returns “1000000”.
Explanations <freq> ranges from 33 Hz to 1 GHz.
Default 2 MHz
Front Panel Meas, ACP
Meas Setup, CH Spacing
50. [:SENSe]:CHPower:AVERage:COUNt
Syntax [:SENSe]:CHPower:AVERage:COUNt <integer>
[:SENSe]:CHPower:AVERage:COUNt?
Function Sets the number of averages of the channel power measurement