Rigol DSA1000A Series, Programming Manual

Page: 28 / 174

RIGOL
Chapter 2 Command Systems
Programming Guide for DSA1000A series 2-14

The peak which has a smaller frequency compared with 1% of
span or the resolution bandwidth will be ignored.

When no desired peak is found, the system will show “No peak
found”.
Front Panel Method one: Peak, Peak Left
Method two: L-Peak
24.
:CALCulate:MARKer<n>:MAXimum:NEXT
Syntax :CALCulate:MARKer<n>:MAXimum:NEXT
Function Searches the peak whose amplitude is the closest to the current
peak‟s and meets the searching condition. The peak is then
identified with a marker
Explanations

<n> is 1, 2, 3 or 4.

The peak which has a smaller frequency compared with 1% of
span or the resolution bandwidth will be ignored.

When no desired peak is found, the system will show “No peak
found”.
Front Panel Peak, Next Peak
25.
:CALCulate:MARKer<n>:MAXimum:RIGHt
Syntax :CALCulate:MARKer<n>:MAXimum:RIGHt
Function Searches the nearest peak located to the right side of the current
peak and meets the searching condition. The peak is then identified
with a marker.
Explanations

<n> is 1, 2, 3 or 4.

The peak which has a smaller frequency compared with 1% of
span or the resolution bandwidth will be ignored.

When no desired peak is found, the system will show “No peak
found”.
Front Panel Method one: Peak, Peak Right
Method two: R-Peak
26.
:CALCulate:MARKer<n>:MINimum
Syntax :CALCulate:MARKer<n>:MINimum
Function Searches the peak with the minimum amplitude on the trace and
identifies it with a marker.
Explanations

<n> is 1, 2, 3 or 4.