Rigol DSA1000A Series, Programming Manual

Page: 109 / 174

Chapter 2 Command Systems
RIGOL
Programming Guide for DSA1000A series 2-95
:TOI:AVER:COUN 100
The query returns “100”.
Explanations <integer> ranges from 1 to 1000.
Default 10
Front Panel Meas, TOI
Meas Setup, Avg Num
86. [:SENSe]:TOI:AVERage[:STATe]
Syntax [:SENSe]:TOI:AVERage[:STATe] OFF|ON|0|1
[:SENSe]:TOI:AVERage[:STATe]?
Function Turns on or off the average function of the TOI measurement.
The query returns “0” or “1”.
Default OFF|0
Front Panel Meas, TOI
Meas Setup, Avg Num, On/Off
87. [:SENSe]:TOI:AVERage:TCONtrol
Syntax [:SENSe]:TOI:AVERage:TCONtrol EXPonential|REPeat
[:SENSe]:TOI:AVERage:TCONtrol?
Function Selects an average mode of the TOI measurement from EXP or REP.
The query returns “EXP” or “REP”.
Explanations

In Exp mode, the result is from the exponent average calculation
of the current N (specified by [:SENSe]:TOI:AVERage:COUNt)
measurements.

In REP mode, the result is the arithmetic average of the current N
(specified by [:SENSe]:TOI:AVERage:COUNt) measurements.
Default

EXPonential
Front Panel Meas, TOI
Meas Setup, Avg Num, Exp/Repeat
88. [:SENSe]:TOI:FREQuency:SPAN
Syntax [:SENSe]:TOI:FREQuency:SPAN <freq>
[:SENSe]:TOI:FREQuency:SPAN?
Function Sets the span of the TOI measurement, the default unit is Hz, such as
:TOI:FREQ:SPAN 1000000 or :TOI:FREQ:SPAN 1MHZ
The query returns 1000000.
Explanations <freq> ranges from 100 Hz to 3 GHz.