Rigol DSA1000A Series, Programming Manual

Page: 103 / 174

Chapter 2 Command Systems
RIGOL
Programming Guide for DSA1000A series 2-89
Syntax [:SENSe]:EBWidth:AVERage:TCONtrol EXPonential|REPeat
[:SENSe]:EBWidth:AVERage:TCONtrol?
Function Sets the average mode of the Emission Bandwidth measurement.
The query returns “EXP” or “REP”.
Explanations

In Exp mode, the result is from the exponent average calculation
of the current N (specified by
[:SENSe]:EBWidth:AVERage:COUNt) measurements.

In REP mode, the result is the arithmetic average of the current N
(specified by [:SENSe]:EBWidth:AVERage:COUNt) measurements.
Default

EXPonential
Front Panel Meas, EBW
Meas Setup, Avg Mode, Exp/Repeat
64. [:SENSe]:EBWidth:MAXHold:STATe
Syntax [:SENSe]:EBWidth:MAXHold:STATe OFF|ON|0|1
[:SENSe]:EBWidth:MAXHold:STATe?
Function Turns on or off the Max Hold function.
The query returns “0” or “1”.
Default OFF|0
Front Panel Meas, EBW
Meas Setup, Max Hold, On/Off
65. [:SENSe]:EBWidth:FREQuency:SPAN
Syntax [:SENSe]:EBWidth:FREQuency:SPAN <freq>
[:SENSe]:EBWidth:FREQuency:SPAN?
Function Sets the span of the Emission Bandwidth measurement, the default
unit is Hz, such as
:EBW:FREQ:SPAN 1000000 or :EBW:FREQ:SPAN 1MHZ
The query returns “1000000”.
Explanations <freq> ranges from 100 Hz to 3 GHz.
Default 2 MHz
Front Panel Meas, EBW
Meas Setup, Span
66. [:SENSe]:EBWidth:XDB
Syntax [:SENSe]:EBWidth:XDB <real_amp>
[:SENSe]:EBWidth:XDB?